Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Revere
If you own or manage one of Revere’s older two- and three-deckers, you already know the chimney on top of it is a different animal than what most sweep services are set up for. We work on Revere chimneys that were built before liners were standard, that vent oil furnaces instead of fireplaces, and that sometimes share a wall with the flue next door. That’s the work. Call (833) 922-2686 and we’ll book a sweep and a Level 2 inspection so you can see the inside of your flue on camera before anyone recommends a thing.

We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Revere Homeowners Call Chimney Sweep Lynn for Chimney Sweep
Most of what goes wrong with a chimney in Revere doesn’t announce itself. No smoke in the living room, no smell, just a flue that’s been quietly losing mortar for a decade. Our technicians have up to 9 years of experience reading exactly those conditions, and we document what we find so you’re not taking anyone’s word for it. We serve Revere regularly enough that the housing stock here isn’t a surprise to us – the brick stacks on the three-deckers off Broadway, the clay-tile flues that were never lined, the oil furnaces tied into chimneys built for coal.
We’re licensed & insured, and every sweep includes a camera inspection and a photo report you keep. That matters more in Revere than in most towns because so much of this housing is rental property under absentee ownership. A written record of flue condition is often the whole point of the visit. If you’re a landlord, that report is what protects you. If you’re a new owner who just got a home inspection flagged for “chimney – further evaluation,” it’s what tells you whether you’re looking at a cleaning or a repair.
We don’t run a sales pitch off a glance up the stack. The camera goes down, we show you the footage, and then we talk about what, if anything, needs doing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning in Revere
Chimney Cleaning in Revere starts with understanding what your flue actually serves. In this city, that’s frequently an oil furnace, not a fireplace, which means the soot load builds through the October-to-April heating season and the draft characteristics are different from a wood-burning stack. A typical chimney cleaning here runs $175 to $325, and it includes brushing the flue, removing soot and any creosote, and a camera inspection with photos.
What the visit covers
We brush the full run of the flue, clear the smoke chamber and shelf, and check the firebox and damper. Then the camera goes down so you can see the mortar joints, the flue tiles, and the crown from the inside out. You get the images whether or not we find anything.
When a Revere chimney needs it
Annual cleaning is the baseline for any active flue, and an oil-furnace stack in a 1900s wood-frame home earns that schedule. If you’ve just bought the building, or a home inspection flagged the chimney, book the cleaning and the Level 2 together and get it documented in one visit. If it’s been more than a year, don’t guess at the soot level – have it checked.
Fireplace Cleaning in Revere
Fireplace Cleaning in Revere is a separate job from furnace-flue work, and it’s the one most people picture: the firebox, the damper, the smoke chamber, the hearth. A typical fireplace cleaning here runs $150 to $275 when it’s done alongside a sweep, and it covers soot removal from the firebox and smoke chamber plus a check of the damper operation and firebox mortar.
Creosote and what the firebox tells us
First-degree creosote is the light, flaky soot a brush takes off easily. Third-degree is the glazed, hardened type that’s baked onto the flue wall and needs more than brushing. The firebox and the first few feet of flue usually tell us which one you’re dealing with before the camera even goes down. Any amount of creosote is fuel sitting inside your chimney, and the glaze is the part that matters most.

Gas inserts and oil appliances
A gas insert still needs its venting checked and its firebox cleaned, even though there’s no wood smoke. An oil furnace flue needs the soot pattern read, not just swept, because a restricted furnace flue is a carbon monoxide concern rather than a fireplace one. We treat those two jobs differently on purpose.
Trusted Brands We Service in Revere
When a Revere chimney does need repair, we specify professional-grade components: Olympia Chimney for venting and caps, DuraFlex flexible liner systems for relining work in high-heat applications, and HeatShield for resurfacing a flue that’s compromised but doesn’t need a full tear-out. These are the brands commercial chimney professionals use, and they’re traceable and warrantied, which matters when you’re documenting a repair for a rental property or a real estate transaction. We don’t carry parts on a truck or stock inventory locally. What we do is spec the right component for your flue, order it, and get back to you with a firm schedule. That’s a longer path than slapping in whatever ships fastest, and it’s the one that holds up.
Common Chimney Sweep Problems We See in Revere Homes
- Unlined clay-tile flues serving oil furnaces. Many Revere chimneys were built before liners were required, and a furnace vented into an unlined stack is running combustion gases past bare mortar. The camera is the only way to know how much of that tile has already cracked.
- Coastal damp eating the mortar and crown. Nor’easters and salt-laden air off the water accelerate mortar joint deterioration and exterior spalling on Revere chimneys faster than inland towns see. A crown that’s hairline-cracked in Saugus may be actively failing here.
- Shared party-wall chimneys in the dense blocks. In Beachmont and along the Shirley Avenue blocks, two flues from two separate units often run up one chimney on a party wall. Sweeping one unit can expose a venting defect in the adjoining flue that nobody hired anyone to look at.
- Compressed soot buildup from the long heating season. October through April is a short window for a lot of soot, and an oil-fired flue accumulates it steadily. Skipping a year doesn’t just mean more brushing – it means a restricted flue and a draft problem you’ll notice as headaches or a furnace that won’t pull.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Revere, MA
Here’s what the work actually costs in this market. A standard sweep with a camera inspection runs $175 to $325. A fireplace cleaning alongside a sweep runs $150 to $275. A Level 1 inspection is $125 to $225, and a Level 2 with video documentation – the one you want for a home purchase or a rental compliance record – runs $225 to $425. Liner resurfacing with HeatShield typically lands between $1,800 and $3,200 depending on flue length and condition, and a full DuraFlex reline runs $2,800 to $5,500. What moves the number within those ranges is flue length, how much creosote has to come out, and whether the crown or mortar needs attention at the same time. Every job is priced per job by a written estimate, and the estimate is free. Call (833) 922-2686 for an exact quote.
We Also Serve Cities Near Revere
We work the communities around Revere as well – Chelsea, Malden, Saugus, and Nahant – and the housing stock shifts as you move out of the city. If you’re outside Revere and wondering whether we cover your street, call and ask. Our chimney sweep service covers sweeping, repair, and inspection under one roof, so one call handles the whole chimney.
Serving Revere, MA – Our Local Coverage Area
We serve Revere and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Revere
Yes, an oil-furnace flue in an unlined clay-tile stack should be swept every year, and inspected closely each time. The heating season here runs October through April, which concentrates soot quickly, and an unlined flue has no barrier between combustion gases and bare mortar. Annual cleaning plus a camera check is how you catch tile cracking before it becomes a reline. Call (833) 922-2686 to book it – estimates are free.
Chimney sharing is when two flues from two separate units run up a single party-wall chimney, which is common in the dense three-decker blocks around Beachmont and Shirley Avenue. It comes up because sweeping one unit often reveals the adjoining flue’s condition, and that flue’s owner never hired anyone to look. If you own the building, that’s documentation you need regardless. Call (833) 922-2686 and we’ll inspect both sides.
You know because you see the camera footage before anyone recommends a liner. In Revere’s older two- and three-deckers, a liner call should follow visible evidence of cracked or missing flue tile, spalled mortar, or a failed crown – not a glance up the stack. We show you the images and tell you plainly when a repair can wait. Call (833) 922-2686 for an inspection with photos you keep.
Yes, meaningfully. Salt-laden damp air and nor’easters accelerate mortar joint deterioration, flue-tile cracking, and exterior spalling on Revere chimneys in a way inland towns don’t see as quickly. The crown and the exterior mortar are the first things to go, and both let water in behind the flue. A camera inspection plus a look at the crown tells you where you stand. Call (833) 922-2686 – estimates are free.
First-degree creosote is light, flaky soot that a brush removes easily; third-degree is the glazed, hardened deposit baked onto the flue wall that brushing won’t touch. The firebox and the first few feet of flue usually tell us which you have. Any level is fuel inside the chimney, and the glazed type is the one that needs more than a sweep. Call (833) 922-2686 for an assessment you can see on camera.
Book a Chimney Sweep in Revere
Whether you’re a Revere landlord who needs a written flue-condition record, a new owner sorting out what the home inspection meant, or a homeowner who just hasn’t had the chimney looked at in a few years, the path is the same: sweep, camera, documentation, then a recommendation only if the footage supports it. We install and specify DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we’re licensed & insured. Call (833) 922-2686 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lynn.