Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Melrose
If your chimney is smoking into the room, the mortar is crumbling off the stack, or an inspector flagged the flue, we can help you sort out what’s actually wrong. We handle chimney repair across Melrose, from the older streets off Main Street to the tight blocks near Ell Pond, and we bring a camera so you can see the inside of your own flue before anyone recommends a thing. Call (833) 922-2686 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Most of what we fix in Melrose starts with the same story: a chimney built for coal or early wood, later asked to vent a woodstove, an insert, or a gas appliance it was never sized for. Getting that wrong costs real money. Getting it right starts with looking.
Why Melrose Homeowners Call Chimney Sweep Lynn for Chimney Repair
Melrose is dense, old, and full of owner-occupied homes that people actually invest in. That shapes the work. Chimneys here are often original single-wythe brick or clay-tile flues that have been through decades of coal-then-wood service, and plenty of them have had a wood stove or fireplace insert dropped in without a reline. We understand the difference between a chimney that needs repointing and one that needs a liner, and we don’t blur the two.
Because we cover sweeping, repair, and inspection, one specialist stays accountable for the whole chimney system. Structural problems found during a cleaning get quoted by the same people who cleaned it, not referred out. We specify DuraFlex flexible liner systems, Olympia Chimney and Famco components, and HeatShield for flue resurfacing, so the parts going into your chimney are traceable and warrantied rather than anonymous.
We serve Melrose and the surrounding towns with the same written documentation we’d want if we were buying the house. Our technicians have up to 9 years of experience, and our chimney repair work is built around camera evidence you get to see before you approve anything.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Installation in Melrose
Chimney Cap Installation in Melrose comes up whenever water is getting into a flue and nobody can figure out where the leak starts. A properly fitted cap keeps rain, snow, birds, and squirrels out of an open flue, and it protects the crown below from the freeze-thaw punishment that defines a Melrose winter. On the older Victorians and four-squares around here, an uncapped clay flue is the most common open door we find.
We fit caps in stainless and copper and select them for the flue they actually sit on, not the closest size on the shelf. Olympia Chimney and Copperfield caps hold up to New England weather and fit the flue opening correctly instead of rattling loose in the first windstorm. Installation is straightforward and usually doesn’t run into real money.
Why a Loose or Missing Cap Matters Here
An open flue takes water straight down into the smoke chamber and firebox. That moisture works into brick and mortar and speeds up the spalling older Melrose chimneys already fight.
Fitting the Cap to the Actual Flue
Old flues are rarely square or even. We measure and mount so the cap sits level and seals the top without trapping exhaust. A cap that fits like that lasts.
Chimney Cap Replacement in Melrose
Chimney Cap Replacement in Melrose is usually a smaller job than homeowners expect, and it solves a problem that gets worse every winter it’s ignored. Caps rust, dent, come loose in wind, or were sized wrong from the start. When one fails, the flue underneath starts taking water and the crown below it starts cracking.
We check the cap, the mesh screen, and the crown as one unit. If the screen is torn, animals get in. If the cap is bent or undersized, the draft suffers and the top of your chimney keeps absorbing moisture. We replace with Olympia Chimney or Famco caps chosen for your flue and roof pitch, and we’ll tell you plainly if the old cap can be re-secured instead of replaced.
Signs the Cap Needs Replacing
Rust streaks down the chimney face, a screen torn through, a cap sitting off-center, or water stains inside the firebox after a storm. Any of those means it’s worth a look.

Checking the Crown at the Same Time
A failing cap often hides a cracked crown. We inspect the crown while the cap is off and flag it if it needs repair, so you’re not paying twice for the same trip up the ladder.
Trusted Brands We Service in Melrose
We install and specify professional-grade materials, and we think that’s the difference between a repair that holds and one that gets redone. On relining work we use DuraFlex flexible liner systems; for restoring compromised clay-tile flues we use HeatShield resurfacing; and for caps, covers, and venting we fit Olympia Chimney and Famco components. These are the same product lines commercial chimney professionals reach for, and they come with traceable sourcing and real warranties. We don’t stock parts locally – every component is ordered to fit your specific flue and job. That means no guessing at sizes and no anonymous hardware, just materials selected for the chimney in front of you and a turnaround that stays sensible because we plan the order before we start.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Melrose Homes
Some of what we find in Melrose repeats across the city’s pre-1930 housing. The combination of age, density, and cold winters produces the same handful of failures.
- Woodstove or insert added without relining. The appliance vents into a flue sized for something else entirely, so it drafts poorly and creosote collects where a brush can’t reach. That’s a safety issue, not a cosmetic one, and it’s the single most common thing we find.
- Freeze-thaw spalling on the north face. Cold winters crack and spall mortar joints on older single-wythe brick, and the frost-exposed north side takes the worst of it. Often that gets quoted as a full rebuild when repointing solves the actual problem.
- Third-degree glazed creosote in clay-tile flues. Hard, tar-like creosote is sometimes presented as automatic reason for a new liner. That decision needs camera footage behind it, not just a glance down the flue.
- Cracked crowns and failing mortar on shared or closely spaced flues. On tightly packed homes off Main Street and near Ell Pond, one failing flue can cause drafting problems next door. Neighbors often notice the smoke before the owner does.
Pricing for Chimney Repair in Melrose, MA
Repair pricing in Melrose tracks the age and condition of the housing stock, and you deserve real numbers before we start. A typical mortar repointing job runs $500 – $1,400, and cape or crown repair runs $300 – $800. Chimney cap installation typically runs $250 – $550, and a full flue reline using a DuraFlex or Olympia liner generally falls between $3,000 and $6,500. HeatShield flue resurfacing, which restores a compromised clay flue without a full liner tear-out, usually lands in the middle of that range.
Those are estimated ranges, not a quote. What sets the final number is the flue size, how much brick needs repointing, the roof pitch, and whether a liner has to be ordered to fit. The written estimate is the price, and the estimate itself is free. We don’t recommend work you don’t need, and we’ll tell you plainly when a repair can safely wait until spring. Call (833) 922-2686 to schedule.
We Also Serve Cities Near Melrose
Melrose sits close to several towns where we do the same repair and relining work. If you’re in Malden, Saugus, Revere, or Chelsea, we can help with the same camera-first approach and the same brands. The older housing in these towns shares the same clay-flue and freeze-thaw problems, and the same need for evidence before anyone quotes a rebuild. Wherever you are along that stretch, call and we’ll talk through what your chimney actually needs.
Serving Melrose, MA – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Melrose
Usually yes, if the woodstove vents into a flue that isn’t sized and insulated for it. A woodstove needs a properly sized, insulated liner to draft correctly and move creosote up and out. But the decision should come from a camera inspection, not a guess, so ask for the footage before you approve a reline. Call (833) 922-2686 for a free estimate.
Insist on seeing the camera footage of your own flue before approving anything. A legitimate recommendation comes with pictures and a clear explanation of what’s wrong and why it can’t wait. If someone tells you that you need a new liner with no camera evidence you can see, get a second opinion. Call (833) 922-2686 and we’ll show you what we actually find.
It could be. Many of the tightly packed homes off Main Street and near Ell Pond were built with shared or closely spaced flues, so a blockage or drafting problem in one stack can show up in the neighbor’s smoke. That’s worth a proper inspection of both, not just a guess. Call (833) 922-2686 and we’ll scope it on camera.
Spalling means water has gotten into the brick and mortar and frozen and thawed, and in Melrose that’s most aggressive on the frost-exposed north face. In most cases it’s a repointing job rather than a rebuild. A full rebuild gets quoted far too often when repointing would hold. Call (833) 922-2686 for a free estimate.
Yes, especially in an older Melrose home, because an idle chimney still collects water and animals, and a flue that was never properly sized for its appliance can be failing whether or not you used it this winter. An inspection with written documentation also helps if you’re buying, selling, or dealing with an insurer. Call (833) 922-2686 for a free estimate.
Whether it’s a cap that needs replacing, mortar that’s crumbling on the north face, or a flue that needs relining, the same rule applies: see the evidence, then decide. Sweep, repair, and inspect, handled by one specialist, with materials you can trace and a written estimate that sets the final price. Call (833) 922-2686 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lynn.