Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Salem
If you live in Salem and your chimney is leaking, smoking, or shedding mortar, you’re dealing with a very old masonry stack in a very tight neighborhood. Repairing it well means understanding how it was built, not just slapping on a patch. We serve homeowners across Salem, from the McIntire Historic District to the streets off Lafayette and Essex. The work here is delicate: original lime-mortar joints, unlined or clay-tile flues, and stacks that sometimes serve more than one home. Call (833) 922-2686 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Salem Homeowners Call Chimney Sweep Lynn for Chimney Repair
Salem chimneys are a different animal from what you’d find in a newer suburb. Our technicians have up to 9 years of experience, and a good share of that time has been spent on 18th- and 19th-century brick stacks in New England’s historic cores. When the work needs a documented inspection for a home purchase or an insurer, we can provide written findings suitable for both.
Because we handle sweeping, repair, and inspection in one place, structural problems found during a cleaning don’t get handed off to a second contractor. You deal with one team and one accountability chain for the whole chimney system. We specify professional-grade materials – chimney repair work here uses HeatShield for flue resurfacing and DuraFlex stainless liners where a full reline is required, rather than the cheapest sheet metal available.
For Salem specifically, our crews know the historic-district review process and how to coordinate repair methods with preservation standards. That matters on Chestnut Street and around the McIntire district, where a repair approach that works in a 1990s colonial won’t pass on an 1804 Federal.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Salem
Chimney Liner Installation in Salem starts with a Level 2 inspection, and the result usually follows one of two paths. Much of the housing here has original clay-tile or unlined flues in soft brick. A damaged liner is a safety problem: gases can migrate into the home or, in a shared stack, into a neighbor’s unit. Where the flue is intact enough to reassess, we use HeatShield to resurface the existing liner from the inside – a restoration that avoids tearing out original masonry. Where the liner has fully failed, a DuraFlex stainless flexible liner is installed and properly insulated. A typical liner installation in Salem runs $2,800 – $5,500 depending on flue height, tile condition, and whether a second flue needs work. The written estimate sets the final price.
Resurfacing versus Relining
HeatShield restores a flue that’s cracked but structurally sound, casting a new smooth surface inside the old one. A stainless reline replaces the pathway entirely. The choice depends on how much of the original tile remains intact, which a camera inspection will show you directly.
What a Liner Inspection Involves
We run a camera down the flue and photograph what we find. You see the same images we do before any recommendation is made, and if the liner can safely wait another season, we’ll tell you that.
Chimney Flashing Repair in Salem
Chimney Flashing Repair in Salem has to account for roof angles and tight spacing that rarely come up in newer construction. On Salem’s packed wooden and brick homes, a flashing gap at the chimney-to-roof joint lets water run into the masonry and, in attached buildings, can damage adjacent flues in the same stack. Flashing repair reseals that joint with proper step and counter flashing. In the McIntire district where chimneys are close together, a small leak from one roof can look like it’s coming from the neighbor’s. A typical flashing repair in Salem runs $350 – $900 depending on roof pitch and access. The written estimate sets the final price.
Spotting Flashing Problems
Staining on the ceiling near the chimney, a rusty damper, or crumbling mortar just below the roofline usually points to a flashing failure. You don’t need a heavy rain to confirm it – a hose test at the joint will show movement clearly.
Why Salt Air Matters Here
Salem sits on the harbor, and salt-laden air eats at flashing metal and mortar more aggressively than inland towns experience. That means flashings here should be checked at every sweep, not just when a leak appears.

Trusted Brands We Service in Salem
We specify industry-recognized brands because anonymous components fail without warning. Our relining work uses DuraFlex flexible liner systems and HeatShield resurfacing, both common to commercial chimney professionals. Caps and venting components come from Gelco and Olympia Chimney, chosen for fit and longevity. We don’t keep parts stocked locally; instead, we specify the right product for the job and get it in. That keeps turnaround honest and means what’s installed is what’s documented and warrantied.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Salem Homes
- Shared-stack cross-contamination. In the McIntire district, a damaged flue or failed mortar joint can let gases move between attached units. A Level 2 inspection with camera footage is the only reliable way to see it.
- Spalling brick on shared chimneys. Soft 1800s brick flakes and sheds in Salem’s freeze-thaw cycles, and on shared stacks the damage affects more than one household. Repointing and waterproofing slow it down before it reaches the flue.
- Failing lime-mortar joints. Centuries-old lime mortar is more forgiving than modern cement but erodes from humid summers and coastal winters. Repointing with compatible mortar protects the original brick rather than cracking it.
- Improper flashing repairs. Tightly packed roofs make flashing work hard to do cleanly, and a botched job speeds water damage into adjacent flues. Proper step flashing and counter flashing matter more here than patch-on caulk.
Pricing for Chimney Repair in Salem, MA
Repair costs in Salem vary mainly by the condition of the original masonry and whether the chimney is shared. Mortar repointing and tuckpointing typically run $600 – $1,800 depending on linear footage and access. Spalling brick repair and partial rebuilds run $1,200 – $4,500. Waterproofing a full stack runs $450 – $1,100. Chimney liner work, as above, is $2,800 – $5,500, and flashing repair is $350 – $900. These are typical estimates for the Salem market; the written estimate you receive sets the final price. Nothing is recommended without camera evidence you can see, and we’ll say plainly when a repair can safely wait.
We Also Serve Cities Near Salem
Alongside Salem, we serve the North Shore towns that share its housing and weather: Swampscott, Lynnfield, Lynn, and Saugus. The 18th- and 19th-century stock, coastal salt air, and cold winters are the same, so the repair approach carries over.
Serving Salem, MA – Our Local Coverage Area
We serve Salem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Salem
You usually can’t tell from inside the house – it takes a camera inspection of the stack. In Salem’s McIntire district and around Chestnut Street, attached or closely spaced 1800s homes frequently share a stack, and only a Level 2 inspection shows how many flues it contains and where they vent. Call (833) 922-2686 for an inspection you can watch.
Water staining on ceilings near the chimney, a rusty damper, and crumbling mortar just below the roofline are the classic signs. On Salem’s packed roofs, a small flashing gap can damage adjacent flues in the same stack, so catching it early matters. Call (833) 922-2686 for a free estimate – estimates are free.
Often yes, and HeatShield resurfacing exists precisely to restore a compromised flue without tearing out original brickwork. When a full stainless liner is needed, the job is planned around preserving the historic stack and working within any historic-district review. Call (833) 922-2686 to schedule a camera inspection first.
Heavy heating-season use in cold North Shore winters builds creosote fast, and in original brick or tile flues the hard, glazed stage is difficult to sweep out. That hardened creosote is a real chimney-fire risk, which is why we document what we find and recommend action only when the evidence supports it. Call (833) 922-2686 for a sweep.
Coastal salt air, nor’easters, and freeze-thaw cycles off Salem Harbor attack mortar and crowns harder than inland weather does. Humid summers add masonry dampness and spalling on top of that. A typical repair pattern here is [mortar repointing]($600 – $1,800) followed by waterproofing. Call (833) 922-2686 for a free estimate.
If your Salem chimney needs a close look – whether it’s a leaking flashing, a failing liner, or a shared stack that’s causing odor between units – call Chimney Sweep Lynn at (833) 922-2686 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We document what we find, specify professional-grade materials, and tell you honestly when work can wait.
Written by the team at Chimney Sweep Lynn.