Chimney Repair in Revere, MA | Chimney Sweep Lynn

Chimney Repair in Revere - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Revere

Most of the repair work we see in Revere starts with a chimney that was built before anyone thought much about liners. The early-1900s two- and three-deckers that make up so much of the city have brick stacks with clay-tile or no lining at all, and many were adapted decades ago to vent an oil furnace rather than a fireplace. We know these streets, we know these stacks, and we know that a repair plan here has to account for original masonry and coastal weather. Our technicians have up to 9 years of experience and work with professional-grade materials. Call (833) 922-2686 for a free estimate, and we’ll bring a camera so you can see exactly what we’re dealing with.

Professional mason performing chimney repair with mortar and trowel on roof in Revere, MA

Call (833) 922-2686

Why Revere Homeowners Call Chimney Sweep Lynn for Chimney Repair

Revere chimneys present problems that a generic repair crew tends to misread. The salt air off the water and the wind that comes with a nor’easter chew at mortar joints and flue tiles faster than inland towns see, and the heating season runs long enough that creosote and soot build up in a tight window from October through April. Our work in Revere reflects that – we’re looking for spalled brick faces and cracked crowns on the first inspection, not just the obvious draft complaint.

We connect homeowners with independent local professionals who handle sweeping, repair, and inspection as one relationship, so you’re not juggling a sweep, a mason, and an inspector for one chimney. Our technicians have up to 9 years of experience, and the materials we specify are the ones commercial chimney professionals use – DuraFlex for relining, HeatShield for flue resurfacing, Olympia Chimney and Copperfield for caps and components. We can work with your insurer and provide written documentation suitable for real estate transactions. The estimate is free and set per job in writing before any work begins.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Revere

Chimney Flashing Repair in Revere usually means addressing the metal where the stack meets a wood-frame roof, and on these older roofs that junction is where water gets in first. Flashing on a three-decker is often original: rusted, pulled loose by nor’easter wind, or sealed with tar that has long since failed. We check the step flashing, the counter-flashing set into the brick, and the seal at the crown, then rebuild the connection so water runs off rather than into the attic. A typical flashing repair in Revere runs $250 to $650, depending on how much of the roof edge has to be opened up. When a leak has been running for a while, the masonry around it may need repointing too, and we’ll show you the camera evidence before recommending that.

What a Flashing Repair Involves

We lift the existing flashing where it has separated, replace rusted sections with new metal, and reseal the counter-flashing into a clean mortar joint. The goal is a shed path that survives the next storm rather than a fresh layer of sealant over old failure.

Signs You Need It Now

Water stains on the ceiling near the stack, damp brick below the roofline, or a rust streak down the chimney face all point to flashing. Left alone, that moisture reaches the flue tiles and accelerates spalling.

Chimney Crown Repair in Revere

Chimney Crown Repair in Revere is often the first thing we look at, because that flat concrete cap on top of the stack takes the full force of coastal weather and it’s the entry point for most of the water damage below it. Original crowns on these early-1900s houses are frequently cracked, spalled at the edge, or sloped the wrong way, so rain pools instead of running off. We rebuild the crown with a proper slope and overhang, seal it, and check that the flue tiles sit clear of the new surface. A rebuild of a cracked crown in Revere typically runs $350 to $750, and a full crown replacement on a large stack can reach $900. This is repair work a homeowner can safely postpone briefly in dry weather, but not through a winter of freeze-thaw cycles.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 922-2686

Why Coastal Weather Wears Crowns Faster

Salt-laden damp air works into hairline cracks, then a hard freeze splits them open. The cycle repeats every winter, which is why Revere crowns fail earlier than the same concrete would a few towns inland.

Crown Repair Versus Crown Rebuild

A small crack can be patched and sealed. A crown that has separated from the flue, or one that’s more patch than concrete, gets rebuilt. We show you which one you’re facing on the camera and from the roof.

professional chimney repair service in Revere, MA

Trusted Brands We Service in Revere

We specify DuraFlex flexible liner systems for relining, HeatShield for flue resurfacing where a full tear-out isn’t necessary, and Olympia Chimney, Copperfield, and Famco for caps, covers, and venting components. Those names matter because they carry traceable warranties and they’re the products professional installers rely on in high-heat environments. We don’t stock parts or hold inventory – we specify the right component for your stack and get it into the job. That means fast turnaround on a reline or a crown rebuild without the anonymous parts that fail early. Every material we name is one we’ve chosen for fit and longevity, not for what ships cheapest.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 922-2686

Common Chimney Repair Problems We See in Revere Homes

  • Original unlined flues serving an oil furnace. Many stacks here were built for coal or wood and later hooked to an oil furnace the flue was never sized for. Flue gases and soot degrade the interior brick from the inside, and you won’t know until a camera goes down.
  • Spalling brick and crumbled mortar. Salt air and nor’easter wind drive water into mortar joints, and the freeze-thaw cycle pushes brick faces off. It’s the most common exterior repair we quote in Revere.
  • Party-wall chimney sharing. In the dense Beachmont and Shirley Avenue blocks, two adjoining three-deckers often share one stack, with a flue from each household. A repair on one side routinely exposes a venting or liner problem on the neighbor’s side that no one has inspected.
  • Cracked flue tiles and a failing crown. A crown that sheds water incorrectly lets damp reach the flue tiles, which then crack. It’s a small repair that becomes a reline if it’s left through a few winters.

Pricing for Chimney Repair in Revere, MA

Repair costs here track the age of the housing stock. A typical mortar repointing job on a Revere stack runs $400 to $1,200, spalling brick repair and tuckpointing run $500 to $1,500 depending on how much face is affected, and chimney waterproofing runs $300 to $700. A partial rebuild on a badly deteriorated stack can run $2,000 to $6,000. Flashing repair lands around $250 to $650, and crown work around $350 to $900. What moves the number is the extent of damage the camera reveals and whether the flue needs resurfacing or relining on top of the masonry work. Nothing gets recommended without camera evidence you can watch, and the written estimate sets the final price. Estimates are free.

We Also Serve Cities Near Revere

We work throughout Revere and the surrounding towns, including Chelsea, Malden, Saugus, and Nahant. If you’re near the Revere border and wondering whether we cover your street, call and we’ll confirm. The same camera-evidenced repair process applies in every town we serve, with the same professional-grade materials. Reach our chimney repair team for a free estimate.

Serving Revere, MA – Our Local Coverage Area

We serve Revere and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Revere

Why Revere Chooses Chimney Sweep Lynn

We set the standard for chimney repair in Revere.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Revere

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Revere Customers Say

Trusted by homeowners across Revere and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Craig Doyle
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Shanice Hampton
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Robert Mercer

Ready for Chimney Repair in Revere?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Revere.

(833) 922-2686

Request a Free Estimate in Revere

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7