Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Malden
If you live in Malden and your chimney is giving you trouble, you’re in the right place. We repair chimneys on the city’s older two- and three-deckers, the brick apartment blocks near Malden Center, and the single-families on the east side. Malden’s housing stock is old, and old chimneys need someone who understands what’s actually inside them. Call us at (833) 922-2686 to book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Malden Homeowners Call Chimney Sweep Lynn for Chimney Repair
The chimneys in this city are mostly early-1900s brick flues built for coal and later converted to oil and gas. That history matters. The dense, tree-lined streets here also mean external debris and heavy creosote loads that you don’t see as much in newer suburban housing to the west. The work in Malden is less about modern stainless liners and more about assessing and relining century-old masonry chimneys in homes that have been repurposed several times.
We cover sweeping, repair, and inspection under one specialist, so a structural problem found during a cleaning gets handled in the same relationship instead of being referred out. We document what we find, and nothing gets recommended without camera evidence you can look at yourself. That matters in a city where the industry’s worst upselling happens on exactly this kind of older chimney.
Our technicians have up to 9 years of experience, and they know how these flues behave in New England weather. We’re glad to serve Malden and the surrounding area, and our chimney repair work is built around a simple rule: the footage decides the recommendation, not a sales target.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Installation in Malden
Chimney Cap Installation in Malden usually comes down to keeping water and animals out of an old flue that was never capped in the first place. On the wood-frame two- and three-deckers around Malden Center, an open chimney is an open door for rain, squirrels, and nesting birds, and everything that gets in has to come out before the flue can vent properly. We fit caps from Gelco and Famco, sized to the actual flue opening rather than whatever’s closest on a shelf. A typical cap install runs $250 – $550 depending on flue count and access.
Matching the Cap to the Flue
Old Malden chimneys often have irregular clay tile crowns, which means an off-the-shelf cap won’t seal right. We measure the opening and specify a cap built for that fit. A properly seated cap also keeps rain off the crown, which slows the freeze-thaw damage that eats at these brick stacks every winter.
Single-Flue and Multi-Flue Setups
In a shared chimney, one cap has to cover several flues at once. We map which flue vents what before installing anything, so the cap doesn’t block a furnace or water heater connection. That step saves headaches later.
Chimney Cap Replacement in Malden
Chimney Cap Replacement in Malden is often the first repair a homeowner actually needs, because a rusted or storm-shifted cap is what let the water in. When a cap has blown loose or rusted through, the flue underneath has been taking rain for who knows how long. We pull the old cap, inspect the flue top with a camera, and fit a new one from Copperfield or Gelco sized to the opening. A straightforward replacement typically runs $300 – $650 in Malden, and we set the final price in a written estimate before any work starts.
Signs the Old Cap Is Failing
Rust streaks down the stack, a cap sitting crooked, or water stains on the ceiling near the chimney are the usual flags. If the cap moves when you nudge it, it’s done. We replace rather than patch when the metal has thinned out, since a patched cap fails again within a season.
Caps on Shared Chimneys
Multi-flue chimneys need a cap that covers every opening while leaving each flue breathing. On a shared stack, we verify each flue’s venting role first. Then the replacement is sized to the whole crown, not one flue at a time.

Trusted Brands We Service in Malden
We specify professional-grade materials from recognized manufacturers instead of anonymous components. That means DuraFlex flexible liner systems for relining work, HeatShield for flue resurfacing that restores a compromised flue without a full tear-out, and Olympia Chimney, Famco, Gelco, and Copperfield for caps, covers, and venting. These are the same brands commercial chimney professionals use, and they’re traceable and warrantied. We don’t claim to keep parts stocked locally; what we do is specify the right component for the job and get it in without dragging the work out. When a Malden flue needs a new cap or a liner, you’ll know exactly what’s going in and who made it.
Common Chimney Repair Problems We See in Malden Homes
- Collapsed or missing clay-tile liners. Many Malden flues were built for coal and never properly lined for the gas and oil appliances now vented into them. The flue gases those appliances produce are corrosive, and an unlined flue has nothing protecting the brick from them.
- Spalling brick and crumbling mortar joints. Malden’s cold winters and freeze-thaw cycles work on every exposed brick chimney in the city. Without a sound crown, water gets into the masonry, freezes, and pushes the face of the brick off.
- Improper venting connections. Decades of heating-system swaps leave furnaces and water heaters tied into flues that were never sized for them, sometimes sharing with a fireplace. That causes weak draft and backdraft problems you can smell and feel.
- Cracked or missing chimney crowns. A cracked crown lets water run straight down into the stack year after year. It’s a small repair that prevents a big one, which is why we check it on every visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Malden, MA
Repair pricing here reflects the age of the housing. A typical mortar repointing job in Malden runs $600 – $1,800 depending on how much of the stack is exposed and how much joint needs replacing. Spalling brick repair, where face brick has to be cut out and replaced, typically runs $800 – $2,500. Chimney waterproofing on the exposed stacks common in the city runs $350 – $800. Flashing repair around the roofline usually lands between $300 and $750. A full chimney rebuild, when the stack has deteriorated past patching, runs $3,000 – $8,000. HeatShield flue resurfacing generally falls in the $1,200 – $3,000 range, and it costs less than a full liner tear-out. Every estimate is free and written, and the written estimate sets the final price. If the work can safely wait, we’ll tell you.
We Also Serve Cities Near Malden
Malden sits close to a lot of older housing stock with the same chimney issues. We also work in Melrose, Chelsea, Revere, and Saugus, where the two- and three-family buildings face much the same freeze-thaw wear and coal-era flues. If you’re just outside the Malden line, call and we’ll let you know how we can help.
Serving Malden, MA – Our Local Coverage Area
We serve Malden and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Malden
Yes. We plan the visit around occupied units and handle each flue separately, documenting both. On Malden’s dense two- and three-family streets, flues are often shared or offset between apartments, with one flue serving a furnace and another a fireplace. A repair that addresses only one flue can leave the other venting improperly or hidden behind a party wall, so we camera both and show you what’s there before anything is recommended. Call (833) 922-2686 to schedule around your tenants.
You know because the camera shows it, not because someone says so. A cleaning removes creosote; relining comes up when the footage shows a collapsed or missing clay liner, cracked tiles, or gaps that let corrosive flue gases into the brick. A HeatShield resurfacing can often restore a compromised flue without a full tear-out. We’ll show you the footage and explain what we see. Call (833) 922-2686 for a free estimate.
White staining is usually efflorescence, mineral salts pushed to the surface as water moves through the brick and evaporates. On Malden’s exposed chimneys, it’s a sign moisture is getting in, often through a cracked crown or failing flashing. Left alone, that moisture feeds the freeze-thaw spalling that breaks brick apart. The fix is stopping the water at the source, then waterproofing the masonry. Call for a look at it.
It turns up more than you’d expect, because Malden’s long heating season means heavy creosote buildup in wood-burning fireplaces. Third-degree creosote is the glazed, hardened stage, and it’s the most flammable kind, which is why it gets swept before anyone lights another fire. You can’t judge this by looking up the flue from the hearth. It takes a proper sweep and inspection to find out. Call (833) 922-2686 to book one.
It does, and it’s usually where the damage starts. A cracked crown lets water into the top of the stack, and Malden’s freeze-thaw cycles then force that water into the brick and mortar joints until they fail. Fixing the crown before the masonry goes is a small repair now instead of a rebuild later. We’ll show you the crack and price the fix in writing. Call for a free estimate.
Call Chimney Sweep Lynn for Chimney Repair in Malden
If your Malden chimney has a cap that’s failing, a flue that’s venting wrong, or mortar that’s starting to crumble, call us at (833) 922-2686 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll camera the flue, show you what we find, and recommend nothing you can’t see for yourself.
Written by the team at Chimney Sweep Lynn.