Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Melrose, MA
Chimney inspection in Melrose is a different job than it is almost anywhere else in the region, because so many of the chimneys here were built before anyone was thinking about liners, inserts, or gas appliances. The city’s housing is overwhelmingly pre-1930, and a large share of those flues were originally built for coal and early wood fires. When a modern woodstove, a fireplace insert, or an oil system gets tied into one of those old flues without relining, the result is an undersized or unsealed chimney that drafts poorly and shows damage sooner than it should. That’s why so many Melrose calls that start as a routine cleaning turn into a conversation about lining and masonry. Our technicians have up to 9 years of experience. Call (833) 922-2686 to book an assessment.
Why Melrose Homes Are Different
Melrose is dense with Victorians, four-squares, and colonial revivals, and most of them sit on narrow lots with steep roofs. Their chimneys were often built as single-wythe brick with clay flue tiles sized for coal, then pressed into service for wood and later for gas. Decades of that succession leave their mark: spalling mortar, cracked tiles, and flues that don’t match the appliance now connected to them. Many homes have had a wood stove or fireplace insert added somewhere along the way without a relining, so we routinely find flues that are simply too small for what’s burning in them.
Winter is the other factor. Cold New England freeze-thaw cycles work on older brick, and the thaw in early spring is when exterior chimney faces on the north side of a house tend to show frost damage and opened mortar joints. That’s a repointing item, and it’s worth flagging at the sweep rather than waiting for a bigger repair. Around the older streets off Main Street and near Ell Pond, some chimneys were built as shared or tightly spaced flues between closely packed homes, which means a drafting problem sometimes shows up in a neighbor’s smoke pattern before the owner notices anything inside. If you see that, it’s worth having the flue looked at.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Melrose Services
Two jobs account for most of the calls we get from Melrose homeowners: cleaning out what’s already in the flue, and repairing the structure around it once the cleaning reveals a problem.
Chimney Sweep in Melrose
A sweep here is rarely just brushing. On a Melrose chimney built before 1930, the technician is also reading the flue as it clears: how much creosote has built up, whether the tiles are cracked, whether the flue is the right size for the appliance connected to it, and whether the mortar at the crown and exterior joints is still holding after another winter. On the older streets near Ell Pond, where flues sit close together, we check draft carefully before calling a cleaning finished. When you book a chimney sweep in Melrose, you get the cleaning and an honest read on what the flue actually needs.

Chimney Repair in Melrose
Repair work in Melrose tends to cluster around the same handful of problems: cracked or missing flue tiles, mortar joints that have spalled through decades of coal-then-wood service, and crowns that have lost their slope and let water in. Because so many of these chimneys were built without a modern liner, relining comes up often, and we specify DuraFlex flexible liner systems for the work. Where the flue is compromised but doesn’t need a full tear-out, HeatShield resurfacing can restore it. We handle chimney repair as part of the same relationship as the sweep, so nothing gets handed off to a second contractor.

Chimney Inspection in Melrose

Chimney inspection in Melrose is where most of the real information comes from, because the housing stock here hides problems well until someone looks. A pre-1930 brick chimney with a clay-tile flue can look sound from the street and still be undersized for the insert that was added five years ago, or have cracked tiles behind the mortar that only show up in a camera run. Cold winters and freeze-thaw cycles add to it: the north-facing exterior of many Melrose chimneys takes frost damage that shows as spalling and opened joints long before it shows inside the house. An inspection is how you find that out with documentation rather than a guess. It’s also available as a standalone service, so if you’re buying a house or dealing with an insurer, you get a written report from our chimney inspection work without booking a cleaning first.
Level 2 Chimney Inspection
Signs you need it
A home purchase, a newly added woodstove or insert, a flue that has been through a chimney fire, or a change in how the fireplace drafts are all reasons a Level 2 inspection is the right call in Melrose.
What it costs in Melrose
A Level 2 chimney inspection in Melrose typically runs $200 to $450, and the written report sets the final price.
How we do it
We run a camera through the full length of the flue, check the firebox, damper, crown, and exterior brick, and document what we find in a written report with photos.
Chimney Flue Inspection
Signs you need it
Smoke rolling back into the room, a flue that smells of creosote in warm weather, or tiles that look cracked at the top of the stack all point to a flue inspection.
What it costs in Melrose
A flue inspection in Melrose typically falls in the $150 to $350 range, with the written estimate setting the final number.
How we do it
We drop a camera down the flue, measure it against the appliance it serves, and check the tiles and joints for cracks, gaps, and off-set sections.
What Chimney Inspection Costs in Melrose
| Item | Typical range in Melrose |
|---|---|
| Level 1 inspection (visual, accessible areas) | $100 – $250 |
| Level 2 inspection (camera, full flue and report) | $200 – $450 |
| Chimney flue inspection | $150 – $350 |
Does a Melrose home inspection report mean I need a Level 2 chimney inspection?
Often, yes. A general home inspector flags the chimney but doesn’t scope the flue, so a Level 2 inspection with camera documentation is what actually tells you whether the tiles are sound and whether the flue matches the appliance.
Can you tell whether my pre-1930 Melrose chimney has ever been relined?
Usually. Camera work shows the flue tiles, their condition, and whether a liner has been installed, which matters on a house of this age where an insert may have been added without one. Call (833) 922-2686 for an exact quote – estimates are free.
Brands We Service in Melrose
We specify professional-grade materials from recognized manufacturers, including DuraFlex flexible liner systems, HeatShield resurfacing, Famco caps and venting, Olympia Chimney components, and Copperfield products. We don’t stock parts locally; the right component for your chimney is ordered for the job. Take a look at our brands to see what we specify and why.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Melrose, MA
| Service | Typical range in Melrose |
|---|---|
| Chimney sweep (cleaning and creosote removal) | $150 – $350 |
| Level 1 chimney inspection | $100 – $250 |
| Level 2 chimney inspection (camera and written report) | $200 – $450 |
| Chimney flue inspection | $150 – $350 |
| Chimney cap installation (Famco or Copperfield) | $200 – $500 |
| Crown repair or rebuild | $400 – $1,200 |
| Mortar repointing (exterior) | $500 – $1,500 |
| HeatShield flue resurfacing | $1,200 – $2,800 |
| DuraFlex liner installation | $2,500 – $6,000 |
In Melrose, price climbs mainly with chimney access and condition: a steep roof and narrow lot slows the setup, and a flue that turns out to be cracked or undersized pushes a cleaning into relining territory. Everything we quote is a flat price agreed before the work is booked, and the written estimate sets the final number.
Neighborhoods We Serve in Melrose
We work across Melrose, from the older streets near the downtown core out to the edges of the city, and the housing stock doesn’t change much between them. Homes off Main Street and around Ell Pond get the same treatment as those on the quieter side streets: sweep, inspect what the cleaning reveals, and repair only what the camera actually shows. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. Neighborhoods we cover include:
- Downtown Melrose and the streets off Main Street
- The blocks around Ell Pond
- Melrose Highlands
- Wyoming and the east side
- The Franklin Street and Upham Park area
Service Area – Cities Near Melrose
Melrose sits close to several communities with the same era of housing and the same chimney problems, and we cover them as part of the same service area. If you’re just outside Melrose, we can still book you in. Neighboring cities we serve include Malden, MA, Saugus, MA, Revere, MA, and Chelsea, MA. Booking is handled the same way wherever you are: we confirm the job, give you a written estimate, and schedule the visit.
Serving Melrose, MA – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Melrose
We book Melrose jobs into the next available opening, and we answer the phone 24/7 to take the booking. Dispatch runs from 7am to 7pm, Sunday through Friday. Call (833) 922-2686 and we’ll confirm a time.
Relining work and structural chimney repairs often require a permit, while a routine sweep usually doesn’t. Requirements vary by scope and by the city’s building department, so ask before the work is scheduled and we’ll tell you what the job involves.
Yes. We cover all of Melrose, from downtown out to Melrose Highlands and the east side, with no difference in how the job is booked or priced. If you’re unsure whether your address falls inside the service area, call and we’ll confirm.
If your chimney hasn’t been looked at in a while, or a home inspection left you with questions, call (833) 922-2686 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Written estimates are provided before any work is booked, and on Melrose chimneys of this age, camera evidence comes first.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Melrose Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Craig Doyle"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Shanice Hampton"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Robert Mercer