Chimney Company in Revere - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 922-2686

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Revere, MA

A chimney inspection in Revere usually starts with a question a homeowner can’t answer alone: is this flue safe, and can I prove it? In the dense two- and three-family blocks of Beachmont, Shirley Avenue and the Point of Pines side of town, that question is often about a rental unit, a pending sale or an insurance requirement rather than a cozy fireplace. We handle chimney inspection, sweeping and repair for Revere homeowners and landlords, and we document what we find so you have a written record instead of a verbal maybe. Call (833) 922-2686 to book.

Call (833) 922-2686

Why Revere Homes Are Different

Most of Revere’s housing went up fast in the early 1900s, when wood-frame three-deckers were the standard answer to a growing coastal city. Those chimneys were built with brick and clay tile, and a large share were never lined to a modern standard. Many still serve oil furnaces rather than fireplaces, so the soot load follows the heating season, not the occasional winter fire.

Then there’s the salt air. Revere sits right on the water, and nor’easters drive damp, salt-laden wind across the rooflines. That combination eats mortar joints, hairline-cracks flue tiles and spalls the brick crown faster than in an inland town. The long heating season, roughly October through April, concentrates creosote and soot into a short window, which means a chimney that looked fine in September can be badly fouled by February.

One more Revere reality: in the tight Beachmont and Shirley Avenue blocks, adjoining three-deckers sometimes share a party-wall chimney. Two flues, two separate units, one structure. Cleaning one side can turn up a venting problem on the other, and that’s exactly the kind of thing a written inspection report needs to show.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Revere Services

Revere homeowners call us about two things more than anything else: cleaning out a flue before the heating season, and fixing what the cleaning uncovers.

Chimney Sweep in Revere

A sweep here is rarely a quick brush-and-go. Because so many Revere chimneys serve oil furnaces, we spend more time on soot patterns and draft testing than on fireplace creosote alone, and a party-wall chimney shared between two units gets checked from the flue we’re cleaning through to the cap. If you’re arranging Chimney Sweep in Revere for a rental, we can document the condition of the flue in writing. Flat pricing is agreed before we start, so you know the number going in.

Chimney Sweep in Revere

Chimney Repair in Revere

Salt air and freeze-thaw cycles do a number on Revere masonry. We see washed-out mortar joints, cracked flue tiles, spalled crowns and loose caps on a regular basis, and the fix depends on how far the damage has gone. A resurfaced flue using the HeatShield system can restore a compromised liner without a full tear-out; where the liner is beyond that, a DuraFlex flexible liner is the usual path. We handle Chimney Repair in Revere alongside sweeping so you’re not juggling two contractors for one chimney.

Chimney Repair in Revere
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 922-2686

Chimney Inspection in Revere

Chimney Inspection in Revere

Chimney Inspection in Revere is, in practice, a documentation service as much as a safety check. Given the volume of early-1900s two- and three-family homes here, many owned by landlords who don’t live on site, a proper Chimney Inspection is often requested by a buyer, a lender or an insurer, and the report is what they actually need. Coastal damp makes that inspection more urgent than it would be inland: mortar joints and flue tiles deteriorate faster on a Revere roofline, and problems that would take a decade to develop elsewhere can show up in a handful of heating seasons. Our technicians have up to 9 years of experience reading exactly these conditions.

Chimney Flue Inspection

This is the interior look at the flue itself, the part you can’t see from the hearth or the roof.

Signs you need it

You’re seeing cracked or missing flue tiles, a smoky draft, soot flakes falling into the firebox, or a chimney that serves an oil furnace and hasn’t been looked at since you took ownership.

What it costs in Revere

A flue inspection in Revere typically runs $125 to $300, with a camera-based look toward the upper end of that range.

How we do it

We run a camera down the flue, check tile condition and joint integrity, record what we see, and hand you the findings along with photos.

Level 2 Chimney Inspection

A Level 2 inspection goes beyond the visible flue and covers the whole chimney system, including accessible portions of the attic and crawlspace.

Signs you need it

You’re buying or selling a home in Revere, changing the appliance connected to the chimney, or recovering from a chimney fire or a major storm.

What it costs in Revere

A Level 2 inspection in Revere usually falls between $200 and $450, with the written report included.

How we do it

We inspect the flue with a camera, check the firebox, damper, cap, crown and exterior masonry, then issue a written report suitable for a real estate transaction or an insurer.

What Chimney Inspection Costs in Revere

These are typical estimated ranges for Revere work. The written estimate you receive after we’ve seen the chimney sets the final price.

Item Typical range in Revere
Standard chimney inspection $125 – $300
Level 2 inspection with written report $200 – $450
Camera-assisted flue inspection $175 – $350

Can an inspection be done while the house is occupied?

Yes. The inspection is non-invasive and takes roughly an hour to an hour and a half. For a Revere rental, we can coordinate with a tenant and send the report to an absentee owner afterward.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 922-2686

Will the inspection report work for my insurance company?

It’s written specifically to be usable for insurance and real estate requirements. It documents what we found, with photos, and states plainly what’s urgent and what can safely wait.

Brands We Service in Revere

The caps, covers, liners and venting we specify come from professional-grade lines: Olympia Chimney, Famco, DuraFlex and Copperfield, among others. We don’t stock parts locally, so lead time depends on the specific component. You can see the full range on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (833) 922-2686

Pricing for Chimney Company in Revere, MA

Every figure below is a typical estimated range, not a quote. The written estimate sets the final price.

Service Typical range in Revere
Standard chimney inspection $125 – $300
Level 2 inspection with written report $200 – $450
Camera-assisted flue inspection $175 – $350
Chimney sweep (single flue) $150 – $300
Sweep plus inspection $225 – $400
Chimney cap replacement $200 – $450
Crown repair $300 – $700
Mortar joint repointing $400 – $1,200
Flue resurfacing (HeatShield) $1,200 – $2,800
Flexible liner installation (DuraFlex) $2,000 – $4,500

What pushes price up in Revere is access and condition: a steep coastal roofline, a chimney shared between two units, or flue damage that runs the full height rather than stopping partway. We give you the upfront price before any work begins, and if something turns up mid-job we stop and talk to you before doing anything else.

Neighborhoods We Serve in Revere

We work across Revere, from the waterfront blocks to the western edge near the Malden line. Scheduling is usually straightforward, and if you’re in one of the denser three-decker neighborhoods we can often fit an inspection into a single visit with the tenant present. Call and we’ll find a slot that works.

  • Beachmont
  • Shirley Avenue
  • Point of Pines
  • Revere Center
  • West Revere

Service Area – Cities Near Revere

Revere sits in a tight cluster of North Shore and inner-suburb towns, and we cover the neighboring communities as well. If you’re just over the line in Chelsea, MA or up toward Malden, MA, the same inspection and repair service applies. North of us, we work in Saugus, MA, and out along the water in Nahant, MA. Wherever you are in that ring, call and we’ll confirm coverage and scheduling.

Serving Revere, MA – Our Local Coverage Area

We serve Revere and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Revere

Ready to get started? Free estimates in Revere
Call (833) 922-2686

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Revere Customers Say

★★★★★ 4.8 from 5+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Craig Doyle

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Shanice Hampton

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Robert Mercer

How It Works in Revere

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Revere. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7