Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Lynn Homeowners
The problem a chimney inspection solves is simple: you can’t see inside your own flue, and by the time a problem announces itself, it’s usually a fire, a carbon monoxide reading, or a ceiling stain. An inspection puts a light and a camera where your eyes can’t go and hands you a written record of what’s there. Our technicians have up to 9 years of experience reading what those images show, and we document every finding so you have something concrete rather than a verbal guess. We inspect in Lynn and the surrounding North Shore towns, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 922-2686 and we’ll talk through what you’re seeing.

Fireplace Inspection
Fireplace Inspection is the focused look at the firebox, damper, smoke chamber and the first few feet of flue that a wood-burning or gas fireplace needs before you trust it under load. You need it when you’ve just bought the house, when the fireplace hasn’t been burned in a few seasons, after any smoke rollout into the room, or before the first fire of the year in a Lynn winter that regularly drops below freezing. We check the firebox joints, damper operation, smoke shelf and cap, and we note anything that needs repair in the same visit. A fireplace inspection typically runs $125 to $250, with a Level 2 assessment starting around $200 to $400. The written estimate sets the final price.
Firebox and Damper Check
We look at the firebox brick, the mortar joints between them, and the damper plate for warping or a seal that no longer closes. A damper that won’t seat lets heated room air escape up the flue all winter and lets cold air back down when the fire is out. Small mortar repairs found here are far cheaper than the masonry rebuild a neglected firebox eventually needs.
Smoke Chamber and Shelf
The smoke chamber is the sloped space above the damper, and rough or offset parging there causes smoke to spill into the room instead of drafting up. We check the smoke shelf for debris and the chamber walls for gaps. When the parging is rough, HeatShield resurfacing can smooth it without tearing out the chimney.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the three levels of assessment a chimney may need, from a basic visual check to a full camera evaluation with documentation. You need them when you’re buying or selling a home in Lynn, when your insurer asks for proof of condition, or when a sweep turns up something that needs a closer look. We offer inspection as a standalone service, with written documentation suitable for real estate transactions and insurance requirements, and we can fold it into a sweep or repair visit so you’re not managing multiple contractors. Basic visual inspections run $125 to $250, Level 2 with camera runs $200 to $400, and repair work quoted from those findings starts around $300. The written estimate sets the final price.
Standalone Documentation
If you need a report for a lender, a buyer or an insurer, we can inspect without doing any cleaning or repair work. You get the findings in writing, with photographs of what we saw. That record is yours regardless of whether you hire us for the repair.
Sweep, Repair, Inspect Together
The advantage of a single specialist is that the person who cleans the flue is the person who inspects it and the person who repairs it. Nothing gets lost in a handoff between a sweep-only company and a mason. If the inspection finds a cap that needs replacing, we specify a Famco or Gelco component sized for the flue.
Chimney Flue Inspection
Chimney Flue Inspection is the examination of the flue itself, the vertical channel that carries smoke and carbon monoxide out of your house, checking for cracks, gaps, missing mortar and the condition of any existing liner. You need it whenever the flue has never been checked, after a chimney fire, or when you switch fuel types, since a flue sized for wood may not suit an oil appliance or a gas insert. We run a camera the length of the flue and look at the liner from the inside, then record what we find. Flue inspection typically runs $200 to $400 as part of a Level 2 assessment. The written estimate sets the final price.
Liner Condition and Gaps
Clay tile liners crack with heat cycling, and a crack that runs through the tile opens a path for hot gases to reach the surrounding framing. We check every joint from the top down and note the location of any gap. A flue in that condition isn’t safe to burn until it’s addressed.
Flue Sizing for the Appliance
An oversized flue runs cold and drafts poorly; an undersized one can’t move the volume the appliance produces. We measure the flue against the appliance it serves. Where the existing liner is sound enough, HeatShield resurfacing restores the interior surface without a full tear-out; where it isn’t, we specify DuraFlex flexible liner sized to the job.
Chimney Fire
Chimney Fire is the ignition of creosote buildup inside the flue, and even a small one can crack tiles or warp a liner without the homeowner knowing it happened. You need an inspection after any chimney fire, and ideally before one ever starts, which means an annual look at how much creosote has accumulated. In Lynn, where wood is a real heating source through long cold stretches, glazed creosote builds faster than people expect. We inspect the flue for fire damage, check the chimney exterior at the level of the fire, and tell you plainly whether the chimney is safe to use. Post-fire inspection runs $200 to $400, with any liner repair quoted separately from about $300. The written estimate sets the final price.
Creosote Grades and Risk
Creosote moves from a light soot through a crusty stage to a glazed, tar-like deposit that ignites at lower temperatures. The glazed stage is where small flue fires become structure fires. Sweeping removes the early stages; the glazed stage often needs chemical treatment first.
Damage the Fire Leaves Behind
A flue fire can crack tiles, separate joints, distort a metal liner and damage the cap or crown above. Some of that damage is invisible from the ground or from inside the firebox. We inspect the full length of the flue with a camera so the assessment rests on what’s actually there, not on assumption.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is a full assessment that goes beyond the visible portions of the chimney, using a camera to examine the entire flue, and it’s the level required for most real estate transactions and after any chimney fire or earthquake. You need it when a home in Lynn changes hands, when you’ve changed appliances, or when a basic inspection turned up something that needs a closer look. We inspect the flue, firebox, chimney exterior, crown, cap and all accessible connections to the appliance, then document everything in writing with photographs. A Level 2 typically runs $200 to $400 in Lynn. The written estimate sets the final price.
What the Camera Reveals
The camera shows tile joints, offsets, cracks and any previous liner in a way a flashlight from below never can. We note the location and severity of each defect. That evidence is what turns “you might need a liner” into a specific, photographed finding.
Written Report for Real Estate
A Level 2 inspection produces a report you can hand to a buyer, a seller, a lender or an insurer. We describe the condition we found and photograph it. We won’t recommend work you can’t verify, and we’ll say plainly when something can safely wait.
Chimney Leak
Chimney Leak is water getting into the chimney or the house through the crown, flashing, cap or masonry, and it’s the most common cause of the interior stains and rusted dampers we’re called about in Lynn. You need an inspection when you see a ceiling stain near the chimney, water in the firebox, a rusted damper, or crumbling mortar on the exterior. Water damage is slow and cumulative, so a leak found early is a repair; a leak ignored tends to become masonry work. Inspection and leak diagnosis typically run $200 to $400, with the repair quoted from the findings. The written estimate sets the final price.
Finding the Entry Point
Water rarely enters where the stain appears; it travels along framing before it shows. We check the crown for cracks, the flashing where the chimney meets the roof, the cap, and the masonry joints. Locating the actual entry point is what stops the leak, rather than sealing the symptom.

Crown, Flashing and Cap Repair
A cracked crown lets water into the chimney body, and a failed cap lets it straight down the flue. We repair crowns and flashing, and where the cap needs replacing we fit a Gelco or Copperfield cap sized to the flue. A proper cap also keeps birds and rain out.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera run down the full length of the flue to show the interior in real time, and it’s the only reliable way to see cracks, gaps and obstructions that aren’t visible from either end. You need it as part of a Level 2 inspection, after a chimney fire, or whenever a sweep finds something that can’t be explained from below. We record what the camera sees and review it with you so you can see the same defects we’re describing. A camera inspection typically runs $200 to $400 in Lynn. The written estimate sets the final price.
What We Look For
The camera shows tile condition, joint gaps, offsets, and any obstruction such as a bird nest or a collapsed liner section. It also reveals the condition of a factory-built liner, which can’t be evaluated properly from the outside. We photograph anything that matters.
Seeing It Yourself
You’re being asked to trust an assessment of something you can’t see, so we show you the footage. If we recommend a repair, you’ve seen the reason for it. If the chimney can safely wait, we’ll tell you that too, without upselling.
Brands We Service
We work with professional-grade product lines rather than whatever ships fastest, and that matters when a repair has to last through Lynn winters. We specify DuraFlex flexible liner systems for relining work, chosen for durability in high-heat environments, and HeatShield for flue resurfacing where the existing liner can be restored instead of torn out. For caps, covers and venting we use Gelco and Famco components selected for fit and longevity, and where an Olympia Chimney or Copperfield part is the right one for the flue, we’ll specify it.
Knowing these product lines means knowing where they wear and how they fail, which is what an inspection is really about. Named, traceable materials also mean a repair you can look up and a warranty you can follow. Whether you have DuraFlex, Olympia Chimney or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. This points to a draft problem, an obstruction or a flue sized wrong for the appliance. It won’t fix itself, and continuing to burn makes the creosote worse.
- A strong creosote smell or heavy soot at the top. Both suggest buildup that has gone beyond what a normal sweep clears. That’s the fuel a chimney fire needs.
- Water stains near the chimney or rust in the firebox. Water is entering somewhere and running along the framing before it shows. A rusted damper usually means the leak has been at work for a while.
- Crumbling mortar or a cracked crown on the exterior. The crown sheds water away from the chimney; once it cracks, water goes in instead of out. This is the beginning of masonry damage that gets expensive.
- A carbon monoxide alarm near the chimney. Treat it as urgent and stop using the appliance until the flue is checked. A blocked or damaged flue can send exhaust into the living space.
Our Process, Step by Step
- 1
Talk through what you’re seeing. Before we book, we ask about smoke rollout, stains, smells and the appliance you burn. That conversation tells us whether you need a sweep, an inspection or a repair, so you’re not paying for the wrong service.
- 2
Inspect the accessible portions first. We examine the firebox, damper, smoke chamber, crown, cap and flashing from the outside and the inside. These visible areas often explain the problem before the camera even goes in.
- 3
Run the camera down the flue. A video camera shows the full length of the flue in real time, and we record it. This is where hidden cracks, joint gaps and obstructions become visible and verifiable.
- 4
Review the findings with you. We show you the footage and photographs and explain what each finding means in plain terms. Nothing gets recommended without camera evidence you can see for yourself.
- 5
Put it in writing. You receive a written report, and any repair is quoted from the estimate with the materials named. The written estimate sets the final price, and there’s no obligation to proceed.
How Much Does Chimney Inspection Cost in Lynn?
A typical chimney inspection in Lynn runs $125 to $400, depending on the level you need. A basic visual inspection for an annual checkup generally falls at the lower end, around $125 to $250. A Level 2 inspection with a full camera run, the level most real estate transactions call for, runs about $200 to $400. If a camera inspection is booked as part of a Level 2, it’s included in that range rather than added on top. Repair work quoted from inspection findings starts around $300 and depends on what’s actually wrong.
What moves the price: the level of inspection, whether the flue is accessible, the appliance type, and whether you’re booking inspection alone or alongside a sweep. Height, roof access and the number of flues matter too. What keeps the price honest is a written estimate before any work starts.
How to avoid overpaying: get the findings in writing with photographs, ask which level of inspection you actually need for your situation, and don’t accept a liner recommendation you can’t see the evidence for. Our estimates are free, and we’ll say when work can safely wait.
- Visual inspection: $125 to $250
- Level 2 with camera: $200 to $400
- Camera inspection: $200 to $400
- Leak diagnosis: $200 to $400
- Repair quoted from findings: from about $300
Our Service Area Near Lynn
We inspect chimneys throughout Lynn and the surrounding North Shore, including Saugus, Swampscott, Salem, Revere, Nahant, Melrose, Lynnfield, Malden and Chelsea. Response times vary with the season, so we’ll give you a realistic window when you book rather than a number we can’t hold. For the full picture of what we do, start with our chimney sweep Lynn page, and see the Lynn page for local details. Call (833) 922-2686 to get on the schedule.
Serving Lynn, MA – Our Local Coverage Area
We serve Lynn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Lynn
A chimney inspection is a professional assessment of the condition of your chimney, firebox and flue, done to one of three standard levels. It checks for cracks, gaps, creosote buildup, water entry and any damage that makes the chimney unsafe to use. We document what we find in writing with photographs so you have something concrete to act on.
Most inspections take about an hour, and a Level 2 with a full camera run can take somewhat longer on a multi-flue chimney. A basic visual check is quicker, usually under an hour. We’ll give you a realistic time estimate when you book based on your setup.
A typical chimney inspection in Lynn runs $125 to $400, with a Level 2 with camera at about $200 to $400 and a basic visual check at $125 to $250. The written estimate sets the final price, and estimates are free. Call (833) 922-2686 for an exact quote.
Yes, we work with those product lines and we specify them for repairs where they’re the right fit. DuraFlex flexible liner systems go into relining work, HeatShield for flue resurfacing, and Gelco or Famco for caps and venting. Knowing a product line means knowing where it wears out.
Yes, same-day inspection is often possible depending on the schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call outside dispatch hours is booked into the next opening.
The warranty on any repair comes in writing with the estimate, and it covers the specific materials installed in your chimney. Because we specify named brands such as DuraFlex and HeatShield, the materials carry their own manufacturer coverage as well. Ask us to spell out the terms for your job before booking.
Clear the area around the fireplace and make sure we can reach the hearth and the roof access point. Put the fire out well beforehand, and skip lighting one the day of the visit so the flue isn’t hot. If you have prior inspection reports or paperwork, have them ready and we’ll review them.
Schedule Your Chimney Inspection Service in Lynn Today
A chimney you can’t see inside is a chimney you’re trusting on faith. An inspection replaces that with a camera record and a written report, and our estimates are free with no obligation. Call (833) 922-2686 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll tell you plainly what we find.
Written by the team at Chimney Sweep Lynn.