Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Lynn Homeowners
A cracked crown, a rusted cap, or a flue that no longer vents cleanly is the kind of problem that stays quiet until it doesn’t. In Lynn’s older housing stock, where wood fireplaces, gas inserts, and oil-heating systems share the same chimney stack, small failures turn into water damage and carbon monoxide risk faster than most homeowners expect. We handle the repair side of that work: structural, liner, and cap restoration done with professional-grade materials. Our technicians have up to 9 years of experience, and we document what we find with photos so you can see the problem yourself before you agree to anything. Chimney repair in Lynn is booked per job, and same-day repair is often possible when the schedule allows. Call (833) 922-2686 to set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Cap Installation
Chimney Cap Installation is the fitting of a cover over the flue opening to keep rain, birds, and debris out while letting smoke escape. You need one when a flue is open to the sky, when a new liner has been installed and needs protection, or when an inspector flags an uncapped stack. We fit caps and covers built from Gelco and Famco components, selected for fit and longevity rather than whatever ships fastest, and we match the cap to the flue size and the appliance it serves. Typical installation in Lynn runs $250-$600 depending on cap style and flue configuration. The written estimate sets the final price.
Choosing a Cap Style
Single-flue caps, multi-flue covers, and draft-boosting designs each solve a different problem. A cap with too little free area can choke draft on a wood fireplace, so we size the opening to the appliance rather than to the flue alone. Stainless and copper finishes hold up better than painted steel in our wet winters.
What the Cap Protects
An uncapped flue takes in water with every storm, and that water works down into the liner, damper, and smoke chamber. A cap also stops nesting birds and squirrels from blocking the flue, which is a genuine fire and carbon monoxide hazard. It is one of the least expensive pieces of chimney protection you can add.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the removal of a failed cap and the fitting of a new one before the old unit lets water into the flue. You need it when a cap is rusted through, dented, missing mesh, or sitting loose after a windstorm. We inspect the top of the stack first, because a loose cap often points to a damaged crown underneath it, and then we fit a replacement sized to the flue. Typical replacement in Lynn runs $300-$700 depending on the cap and how much top-of-stack work is needed. The written estimate sets the final price.
Spotting a Failed Cap
Rust streaks down the exterior, mesh that sags or has gaps, and a cap that shifts when you look at it from the ground all point to replacement. A damaged cap also lets water pool on the crown, which speeds up cracking. We photograph the cap and crown from the roof so you can see the condition for yourself.
When Repair Beats Replacement
Some caps can be re-secured or have a damaged mesh panel swapped without replacing the whole unit. We tell you when that is the honest option and when it is false economy. You get the call either way, with the reasoning behind it.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner to contain heat, combustion gases, and creosote safely. You need one when the existing clay tile liner is cracked, when an appliance is upgraded to a more efficient insert, or when an oil-heating system is vented through a flue that was never sized for it. We install DuraFlex flexible liner systems, chosen by professional installers for durability in high-heat environments, and we size the liner to the appliance rather than to the old tile. Typical liner installation in Lynn runs $2,200-$5,500 depending on height, flue configuration, and liner type. The written estimate sets the final price.
Flexible vs. Rigid Liner
Flexible stainless systems handle offsets and older irregular flues that rigid sections cannot navigate. Rigid liner works well on straight stacks and holds up to mechanical sweeping year after year. We look at the flue with a camera before recommending either one.
Insulated Liner Systems
An insulated liner keeps flue gases hot, which reduces creosote buildup and improves draft on an exterior chimney. It also adds a layer of protection between the flue and the framing of the house. Whether you need insulation depends on the flue’s location and the appliance it serves.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal seals where the chimney meets the roof, the most common point for leaks to start. You need it when you see water stains on the ceiling near the chimney, rusted or pulled flashing, or a gap where the flashing was sealed with tar rather than properly stepped into the shingles. We re-step the flashing into the roof, seal the joints correctly, and confirm the repair from the roofline. Typical flashing repair in Lynn runs $350-$900 depending on the roof pitch and how much rebuild is needed. The written estimate sets the final price.
How Leaks Start
Roof cement cracks as it ages, and a tar patch only hides the problem for a season or two. Water then runs behind the flashing and into the attic or down the chimney chase. The fix is metal worked into the shingles, not another coat of sealant.
Flashing and Masonry Together
Flashing failures usually come with spalled brick or a cracked crown right beside them. We check the whole chimney top whenever we are up there, so one visit can cover the leak and the wear around it. Roof-level work carries real fall risk, so we send trained pros rather than encourage a homeowner to climb up.
Chimney Crown Repair
Chimney Crown Repair is the restoration of the concrete cap at the top of the stack that sheds water away from the masonry below. You need it when the crown is cracked, crumbling, or pulling away from the flue, which lets water soak into the brick and freeze, spalling the face of the chimney over winter. We remove loose material, rebuild or resurface the crown with a sloped profile, and seal it so water runs off rather than settling. Typical crown repair in Lynn runs $400-$1,200 depending on the size of the crown and the condition of the masonry under it. The written estimate sets the final price.
Why Crown Cracks Matter
A crown is meant to overhang the brick and slope away from the flue. Once it cracks, water gets in at the top and travels down through freeze-thaw cycles that loosen mortar joints. Small crown cracks are far cheaper to fix than the masonry damage they cause.
Crown Rebuild vs. Resurfacing
A crown with surface cracks can often be resurfaced. One that is broken through, separated, or too thin needs a rebuild to a correct slope. We tell you which one your chimney needs and show you why.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they actually do, and that difference matters when a chimney has more than one problem. You need a specialist who can sweep, inspect, and repair the same system instead of handing you off between contractors. We do all three, which gives you a single point of accountability for the chimney and one written record of what was found and fixed. Typical repair project pricing in Lynn starts at $250-$900 for single-item work and runs higher when liner or masonry restoration is involved. The written estimate sets the final price.
Questions to Ask Before Booking
Ask whether the company will show you photos of the flue and the chimney top. Ask whether the repair comes with a written scope and a written price. If a crew tells you a liner is failing without showing you evidence, you have no way to check the claim.

Why Materials Matter
Two quotes can look identical and use very different components. We specify DuraFlex liner systems, HeatShield resurfacing, and Gelco and Famco caps and covers, the same brands used by commercial chimney professionals. Named materials mean traceable, warrantied parts instead of anonymous components.
Chimney Masonry Repair
Chimney Masonry Repair is the rebuilding of the brick, mortar, and structural sections of the chimney that have deteriorated from water, freeze-thaw, or age. You need it when joints are crumbling, bricks are spalling or loose, or the chimney leans or separates from the house. We repoint mortar joints, replace failed brick, and rebuild the sections that are no longer sound, then cap the work with a properly sloped crown. Typical masonry repair in Lynn runs $600-$3,000 depending on how much of the stack needs rebuilding. The written estimate sets the final price.
Repointing vs. Rebuilding
Repointing replaces the mortar between sound bricks and is the right fix when the brick faces are still intact. Rebuilding is needed when the bricks themselves have lost their face or gone soft. The two have very different costs, so the call matters.
The Water Problem
Masonry fails because water gets in and freezes. A sound crown and a well-fitted cap do more to protect the brick than any coating applied to the outside. We fix the source of the water along with the damaged brick.
Brands We Service
We work with DuraFlex flexible liner systems and know where they wear and how they should be sized. A liner that is undersized for the appliance, or one that was installed without proper insulation, shows up in draft problems and heavy creosote long before it fails outright. Our technicians have up to 9 years of experience reading those signs.
We also fit HeatShield for flue resurfacing, a system designed to restore compromised flues without full liner tear-out, and we install Gelco and Famco caps, covers, and venting. Copperfield components round out the lineup. Whether you have DuraFlex, HeatShield, Gelco, Famco, Copperfield, Olympia Chimney, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney chase. Water near the chimney usually means flashing or crown failure, and it travels into the framing if you leave it. A leak does not stop on its own.
- Crumbling mortar or spalling brick. When the face of the brick flakes off or joints go soft, the chimney is losing structural strength. Freeze-thaw cycles make it worse every winter.
- A strong creosote smell or heavy soot at the damper. That points to a flue that is not drafting or is overdue for cleaning, and creosote is the fuel in a chimney fire. Sweeping and inspection come before any repair decision.
- Draft problems, smoke spillage, or a cold fireplace. Smoke coming into the room or a fire that will not draw can mean a blocked or damaged liner. Carbon monoxide risk is the reason to have it checked rather than worked around.
- A loose cap, cracked crown, or missing mortar at the top. Top-of-stack damage lets water into the flue every storm. It is also the cheapest thing to fix early and the most expensive to ignore.
Our Process, Step by Step
- 1
Book the visit and agree the scope. We start with a conversation about what you are seeing, then set a time for the inspection or the sweep that fits your chimney. Nothing is recommended before we have looked at it.
- 2
Inspect the flue and the chimney top. We run a camera down the flue and check the crown, cap, flashing, and masonry from the roof. The camera shows cracks, gaps, and creosote levels that a flashlight at the damper cannot.
- 3
Document what we find. You get photos and a written explanation of the condition of each part of the chimney, which is useful for a home purchase or an insurance question. We tell you plainly which items are urgent and which can safely wait.
- 4
Write the estimate. Every repair is priced per job and listed in a written estimate, with the materials named. If a liner can be resurfaced with HeatShield instead of replaced, you will see that option and what it saves.
- 5
Do the work and confirm it. Repairs are completed with the specified components, and we check the finished work before we leave. You keep the documentation for your records.
How Much Does Chimney Repair Cost in Lynn?
Chimney repair in Lynn typically runs from about $250 for a single small item, such as a cap or a spot flashing repair, up to $5,500 or more for a full liner installation on a tall stack. The range is wide because the work is different: a crown resurfacing and a masonry rebuild are not the same job, even though both involve the top of the chimney.
A typical cap installation runs $250-$600 depending on cap style and flue configuration. Crown repair runs $400-$1,200. Flashing repair runs $350-$900. Masonry repair runs $600-$3,000 depending on how much brick and mortar needs replacing. Liner installation is the largest item at $2,200-$5,500, driven mostly by chimney height, flue configuration, and liner type. These are typical estimates, and the written estimate sets the final price.
What affects the price most is access and condition: a straight interior flue is simpler than an offset one, and a chimney with one problem costs less than one with three. The way to avoid overpaying is to insist on camera evidence before agreeing to liner or masonry work, and to ask which items can wait a season. Nothing is recommended without evidence you can see. Every estimate is free and includes the photos and a written scope.
Our Service Area Near Lynn
We handle chimney repair in Lynn and the towns around it, including Saugus, Swampscott, Salem, Revere, Nahant, Melrose, Lynnfield, Malden, and Chelsea. Most of these are a short drive, so scheduling is straightforward and a booked sweep or repair usually lands in the first open slot. If you are just outside this list, call and we will tell you honestly whether we cover your address. We also handle chimney repair and chimney repair for homeowners in those neighboring towns.
Serving Lynn, MA – Our Local Coverage Area
We serve Lynn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Lynn
Chimney repair is the correction of damage to the chimney’s structure, liner, cap, crown, or flashing so it vents smoke and gases safely and keeps water out. It covers everything from a new cap to a full liner or masonry rebuild. At Chimney Sweep Lynn we treat repair as part of the same system as cleaning and inspection, so nothing gets referred out. Call (833) 922-2686 for a free estimate.
Most single-item repairs, such as a cap or a flashing fix, are done in a few hours. Crown repair and masonry repointing can take a day, and a full liner installation may take a day or more depending on the height and configuration of the flue. The written estimate includes the expected time. Call (833) 922-2686 to talk through your chimney.
Typical repair costs in Lynn range from about $250 for a small item to $5,500 or more for liner installation, with most single repairs landing between $300 and $1,200. The final figure depends on the condition of the chimney and the materials specified. Every job is priced per the written estimate, and estimates are free. Call (833) 922-2686 for an exact quote.
Yes, we work with DuraFlex flexible liner systems and HeatShield flue resurfacing, along with Gelco and Famco caps and covers. We size liners to the appliance and check the existing flue with a camera before recommending a system. If your chimney has a product we did not install, we still assess it and tell you what condition it is in. Call (833) 922-2686 to book an inspection.
Same-day repair is often possible when the schedule allows, and we will tell you honestly when it is not. We answer 24/7 on the phone, with fast dispatch from 7am to 7pm, Sunday through Friday. We are closed on Saturday, and a call outside dispatch hours is booked into the next opening. Call (833) 922-2686.
The materials we install carry the manufacturer’s warranty, and the written estimate states the terms that apply to your job. We name the brands on the estimate so you can see exactly what is covered and by whom. Ask us about the specific product warranty before work begins. Call (833) 922-2686 with any questions.
Clear the area around the fireplace or hearth and make sure we can get to the roof access if there is one. Move anything fragile away from the chimney breast, and tell us about any gas insert or oil appliance on the system before we arrive. The rest is our job. Call (833) 922-2686 to confirm your appointment.
Schedule Your Chimney Repair Service in Lynn Today
If something about your chimney looks wrong, the fastest path to a straight answer is a visit. We inspect, document, and repair with professional-grade materials, and we tell you plainly when work can safely wait. For chimney sweep lynn and full repair service, call (833) 922-2686 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about chimney repair and chimney inspection before you book.
Written by the team at Chimney Sweep Lynn.